r @f@r @o@l
| @Number of spindle | @2 spindles ( or 1 spindle ) |
| @Lower spindle speed | @15 ` 60 ...@Infinitely speed |
| @Crank shaft rotation | @15 ` 60 ...@Infinitely speed |
| @Overarm pins oscillation width | @Max. 500 o |
| @Clearance between upper-end of @lower spindle shaft to the horizon of @overarm pin arm |
@270 o |
| @Moter | @200V@@750v@@4o@@3Σ@@2pcs.@per each spindle @i1pc. for 1 spindle) |
| @Coolant pump | @200u@@180v@@2o@@3Σ@@1pc. |
| @Dimensions | @W 2,700o@@D 1,650o@@H 1,400o |
| @Weight | @1000kg |
end of lower spindle shaft to the horizon of overarm pin arm.
We are also ready to supply of automatic stop system by timer action; negative
pressure system and special equipment to place gently a heavy upper tool on to
lower spindle tool, if so buyer desired.
(Photographed caster is to be supplied optinally)
@@by lapping or fine polishing.
2)@Infinitely variable motors are used for lower spindle and oscillation,thus
@@individual and optional speeds are available.
3)@The movement of overarm pins by "OSKAR" motion and it's maximum stroke comes to
@@500 mm and sophisticated mechanical design allows to set a center point of
@@polishing stroke at any point on lower polishing tool.
4)@Lifting up and down of overarm pins is operated by air cylinder mechanism
@@following up and down motion of toggle switch by manual operation.
5)@The front door of polishing basin with automatic slurry circulation is freely
@@openable to fasten or unfasten polishing tools or work pieces.
6)@Slurry tank is stainless -steel made and is desingned for long durability in use
@@and also for supplying of equal density of slurry mixture.
7)@The machine is elaborately designed to give the machine longer life, easier
@@operation, non-lubrication for longer hours and maintenance-free structure.
